Additional boot disk drive from hard-How to Partition Your Hard Drive and Why You Would Want To

Check here to start a new keyword search. Search support or find a product: Search. Search results are not available at this time. Please try again later or use one of the other support options on this page. Watson Product Search Search.

Additional boot disk drive from hard

Additional boot disk drive from hard

Additional boot disk drive from hard

Additional boot disk drive from hard

Wait for the computer to boot from the installation disc and display the initial setup menu for the second operating Sexy doctors outfit. He earned his Bachelor of Arts in media and game development and information technology at the University of Wisconsin-Whitewater. Modern-day Macs make use of a new file storage system called Additional boot disk drive from hard Apple File Systemand it has its own alternative to partitions in the form of volumes the two terms are sometimes used interchangeably, which can get confusing. Remember when installing an additional version of USB dongle-protected software like Cubase SX in a new partition that the dongle may need to be temporarily removed, and then reinserted after the application has been installed. I won, but it left me scared lol. Moreover, keeping regular backups of particular groups of files also requires the use of dedicated djsk software to sift them out from the others.

Asianwife handjob. Drive Preparation (for PATA Drives Only)

Can you give me a screenshot? Article Summary X 1. Method 2 Quiz What should you look for when Additional boot disk drive from hard purchase an external hard drive? Hi, I called Dell Support to get information about adding another hard drive to my computer and the person, I am not writing gentleman on intent, told me that Dell does not recommend adding hard drive to the computer and threatened that I will be responsible for the damage. January 10, am. But, what if you need to install a second internal hard Sex drumstick on your Windows 10 device? If you don't already have a SATA hard drive that you want to install, buy one before proceeding. Buy a SATA internal hard drive for your computer. Roses are Red 1 Copper. May 16, Already answered Not a question Bad question Additional boot disk drive from hard. If you have three or more drives in or attached to your PC, consider setting up Storage Spaces.

This tutorial contains instructions on how to mirror boot hard drive on Windows 10, on a legacy or an UEFI based systems.

  • It is useful when the primary hard drive fails and will help you boot from the secondary drive.
  • I called Dell Support to get information about adding another hard drive to my computer and the person, I am not writing gentleman on intent, told me that Dell does not recommend adding hard drive to the computer and threatened that I will be responsible for the damage.
  • Most of the Windows 10 Computer comes with a one single hard drive, But you may want to add a second hard drive as you are running out of disk space.
  • You probably know how hard it is to install an external hard drive in a Windows 10 PC.

As hard drive sizes rise into the hundreds of Gigabytes, it's crucial to consider the benefits that partitioning can bring. I've had a lot of requests to write more about hard disk partitioning just recently. I originally covered this area way back in SOS May , and followed it up three years later in May , but quite a bit has changed in the last couple of years.

For a start, the typical 20GB hard drive supplied with most PCs in May has been replaced in most musician's systems by one of 80GB or more, making it even more important to divide it up to make the most sensible use of space.

Moreover, many of us have already moved or are about to move to Windows XP from 98SE or ME, and as always, it's safer to run both side by side for a few weeks at least until you're sure you have no teething troubles.

Here's my recommended format for multi-boot drives — each one starts with three Primary partitions containing operating systems, while the remainder of each drive is a huge Extended partition containing further Logical partitions for data.

Finally, with many of us routinely installing three or more operating systems for whatever reason, this gives me the opportunity to explain more about the restrictions on where they can be placed on each drive, depending on whether you use the various built-in Windows multi-boot options, or dedicated commercial utilities like Partition Magic and Boot Magic, or the shareware Bootit Direct.

Under the old FAT16 format, it was often necessary to partition a large hard drive simply in order to use all the space, as DOS 4. The problem is that without a little more organisation, once a vast hard drive like this starts to fill up as it inevitably will , finding a particular file can become increasingly difficult among all the thousands on the drive.

Moreover, keeping regular backups of particular groups of files also requires the use of dedicated backup software to sift them out from the others. The most important reason to place audio files onto a separate partition from the Windows and application files is so that they can be easily defragmented. Doing this regularly can make an appreciable difference to playback performance when running lots of simultaneous tracks, and of course it's far quicker to defragment a smaller dedicated audio partition than an entire 80GB or GB drive.

Backing up your audio files is also easier, since you can back up the whole partition en masse. The final attraction of creating separate partitions for operating system, applications and data is that you can use a smaller cluster size like 4kb or 8kb for Windows and its applications, to minimise wastage with the huge number of tiny files that you typically find there, while formatting the audio-only partition with 32kb clusters, which normally provides marginally better performance.

Audio files are always huge, and even if some of them do become slightly fragmented into 32kb chunks between 'defrags', this won't degrade your track count as much as if they ended up split into loads of tiny 4k chunks.

Now that you're hopefully convinced of the benefits of splitting any large hard drive into multiple partitions, let's look a little more closely at the various options and types available, as these still seem to be confusing to a lot of musicians. First, any hard drive must be physically formatted by the manufacturer into tracks, sectors, and cylinders, so that it's recognised by the BIOS of your PC. This is the state in which a new drive arrives. A brand new drive won't appear inside Windows until it has been logically formatted — here's my new 80GB drive, which appears to Partition Magic 7.

Once formatted, Windows will give it a new volume drive letter, and its storage will become available. If you boot into Windows at this stage, although the drive will be recognised in Device Manager as a new Disk Drive, it won't show up as a volume with a new drive letter such as C, D or E see screen shot, below. For this to happen you have to logically format the drive by adding a file system such as FAT16, FAT32 or NTFS, so that Windows or another operating system knows how to use the space to store and retrieve files.

This is what is usually known as 'formatting' the drive. Before you do this you can, if you wish, divide the space into multiple partitions. Each partition can then be logically formatted as you wish, and with a suitable utility like Powerquest's Partition Magic you can even change your mind after Windows and your data are in situ.

Confusion over partitioning is often due to the historic and arbitrary restriction of the maximum number of partitions to four. This must have seemed generous when it was first introducted, but has since caused a lot of frustration as drive sizes have grown. The solution, as with so many PC standards, was to create a workaround: the Extended partition, the trick being that this can contain further 'Logical' partitions.

Even today, you can still create a maximum of only four Primary or Extended partitions on any drive, but if for example you want six partitions on one drive, you could have three Primary ones and one Extended one containing a further three Logical partitions. Most operating systems are supposed to be installed in a Primary partition. Only one of these can be visible and 'active' at a time, however many drives you have in your PC. Any other Primary partitions remain 'hidden' to the PC after boot-up, so you can't access any data in them.

However, this is also the key to creating a multi-boot system: by creating multiple Primary partitions, each containing a different or specially tweaked operating system and applications, you can choose at boot-up time which one becomes Active using a Boot Manager utility, which also forces all the others to Hidden status.

Meanwhile, Logical partitions always remain visible, so one obvious use for them is storing commonly used data such as audio, documents, update files, and so on, which can then be accessed from whichever Primary partition is currently active.

If you want to install loads of different operating systems, you could split your first drive into four Primary partitions, and then split a second drive into Logical partitions for data. However, this is likely to waste a lot of space, since modern drives are rarely available under 30GB, and you simply don't need a quarter of this for any Windows installation — 2GB to 3GB is often quite sufficient, particularly when you're not installing all of your applications on each partition.

A more sensible approach is to install a maximum of three operating systems per drive, each one in its own sensibly sized Primary partition, and then create an Extended partition with the remaining space, containing however many Logical partitions you want for storing audio data, backup files, sample streaming files, and so on.

However, if you're thinking of setting up a complex multi-boot system, there are various other caveats and restrictions to consider before deciding where to place each operating system.

As I've mentioned, all operating systems generally need to be installed into a Primary partition, and ideally on the first drive. However, there's a lot of conflicting information about the details. I've successfully created loads of Windows 98SE installs like this on second and even third drives, but if you're going to use a different boot manager utility you should check its capabilities. Don't get caught out by this restriction as I did while researching this feature — after disabling my first drive I ended up with an XP installation that worked fine on the second drive, but only if I disabled the first drive or changed the drive boot order in the BIOS.

However, Microsoft have also allowed Windows and XP to be installed in a Logical partition on any drive. This is handy if you're strapped for space on your first drive, but does require a few vital system files to still be placed on the first drive's Primary partition, while the vast majority of the OS can reside in a Logical partition on any drive. No wonder users get confused! DOS and Windows NT partitions must also start within the first 2GB of the drive to be bootable, but I doubt that either of these will be required by any musicians nowadays.

Since few people will be installing more than three operating systems per drive, this isn't normally a problem either: once you split your applications among partitions you're unlikely to need a 98SE or XP partition larger than 3GB. Virtually all motherboards do provide this support, to allow drives of greater than 8.

Finally, before embarking on a complicated multi-boot installation, you should also check the capabilities of your boot manager utility to see if there are any further restrictions. The few lines of text contained in the boot. First, make a backup, and then open up the original in Notepad. You'll see several lines that include variations on the following parameters: multi 0 disk 0 rdisk 0 partition 3.

It's the final two that will need to be tweaked if you clone or move an existing XP partition. Although as explained in the main text you can boot from drive 1 but install the majority of XP files on another drive, in most cases it's far easier to keep XP installs on the first drive, so this will remain at '0'. The final parameter is the partition, which is counted from 1 upwards, so your XP install is likely to be 1, 2, or 3 if situated on drive 1.

While you're editing, you might like to change the text description that will appear within the quote marks at the end of each line under the [operating systems] heading. This can be anything you like, although if there's only one option you won't see the boot loader screen options at all. The best way to explain the various partitioning options is for me to work through a practical example, so I took advantage of this opportunity to make some major changes to my PC system.

I recently needed more storage space, as my two existing 30GB drives were nearly full, and I wanted to create both a much larger Gigs partition, and to install a new XP partition for my music making alongside the existing Windows 98SE one. I chose a popular drive model for musicians, the 80GB Seagate Barracuda IV STA, which has an excellent reputation for reliability, performance and low acoustic noise.

I still had a spare IDE connector on my system, so I could have plumbed this in as a third drive. However, this would have resulted in two drives sharing an IDE controller, with a disastrous drop in performance should both ever be accessed simultaneously, so I instead decided to stick with two drives, using the new 80GB one to replace one of my two existing 30GB models.

I did initially connect up all three drives so that I could shuffle data between them. Moving the existing data across from my other two drives was incredibly easy thanks to Powerquest's Drive Image software, which I already use for backup purposes.

Running this from DOS, I could use its Disk To Disk option to copy the current incarnations of various Primary Windows and Logical data partitions straight across to the new drive without having to do any pre-formatting. In most cases I retained the existing partition size, and chose the Drive Image option labelled 'Leave remaining unused space', although you can if you prefer select 'Automatically resize partitions proportionally to fit' the destination drive's unallocated space.

Where I needed more space, such as in my Gigs partition, I just added some using the 'Resize partitions manually to fit' option before the data was copied over. The biggest potential time saving came with the creation of my new 'XP Music' partition to run alongside the existing one labelled '98 Music'. As I'd carefully saved my existing 'XP Review' partition as an image file immediately after installing the OS, adding the latest hardware drivers, and then Activating it, I just used Restore Image to copy this directly to a new partition — why bother to install an OS from scratch more than once?

The only time I hit a problem was once I'd copied across three Primary Windows partitions and one Logical one inside a new Extended partition — each time I then tried to copy across some additional Logical ones Drive Image insisted that it couldn't create more than four Primary partitions on a single drive, even though I wasn't asking it to.

The solution was to launch Partition Magic, create appropriately sized dummy Logical partitions on the new drive, and then return to Drive Image and use Disk To Disk to copy my data over the top of the dummy partitions. After some very lengthy data shuffling, largely due to transfers between Secondary Master and Secondary Slave drives on the same IDE buss, I ended up with a total of 20 partitions across three drives, and was ready for the next stage.

Once all the partitions were in place on the new third drive, I rebooted, and after running the Boot Magic configuration utility to recognise the three additional Windows partitions on the new drive, I now had a total of seven choices on the next boot-up: five 98SE and two XP. All the Waves plug-ins still worked perfectly, since their Pace copy protection is associated with a particular drive partition, and this partition still existed.

The Prosoniq Orange Vocoder also worked — its key disk install was obviously still recognised despite the change of venue for host application and plug-in files. This seems to prove that there are no hard and fast rules when moving partition locations, so don't be tempted to do it in the middle of an important project. As a double-check, I booted into my original '98 Music' partition, and thankfully all my plug-ins and soft synths were still authorised, despite the new hardware configuration.

I was particularly interested to see if the two Windows XP partitions would run normally, since one of them would immediately detect a new hard drive which I was hoping it would accept without requiring a new Activation , while the other was a post-Activation clone of the first. My initial findings were encouraging: my existing 'XP Review' partition was happy to accept the new drive and booted up perfectly, with the added advantage over the 98 installs that it correctly selected UDMA Mode 5 for it without prompting.

However, the cloned XP partition on the new drive refused point-blank to play ball, rebooting my PC from cold if I tried to choose it using Boot Magic. As I've already mentioned, this was partly because it wasn't installed on the first drive, but there's good news to come shortly. This is probably a bigger upheaval than most musicians will face, but it gave me the opportunity to test whether the Activation on my working XP partition would still be happy when shifted to the other IDE controller, and after a second change of drives within a short period of time, and also whether the existing Windows 98SE copy-protected software would once again survive the move.

Thankfully, all my music applications and plug-ins still ran perfectly after my '98 Music' partition moved from Primary to Secondary IDE controller.

This isn't guaranteed, since although after booting the drive the various files still appeared to be on volume C, I suspect some of the hidden copy-protection files now appeared on a differently placed volume. I later confirmed this for the Waves plug-ins, which became deauthorised after I temporarily hid my original Gigs partition, and worked perfectly again after making it active. At least two files named redir.

Waves even claim that you can reformat the authorised partition and your original response will work, although I didn't take this drastic step. My '98 Review' partition had now been cloned from the removed IBM drive to the new Seagate drive, and this now had various problems when launching previously well-behaved applications.

Wavelab 4. The only full-blown casualty was Lounge Lizard, which decided it wasn't authorised after all; AAS were quick to issue another response to the new challenge, so I wasn't too worried. My biggest surprise was that the cloned XP partition, despite refusing to boot while located on a partition on the Secondary Slave drive, now booted up perfectly when the drive was installed as Primary Master. This was excellent news, for two reasons. First, it shows that XP Activation will survive two hard drive changes within 24 hours.

Second, and a far more important point for the PC musician, is that my tests prove that you can successfully clone a pre-Activated XP installation on the same PC, even onto a new drive. Just as satisfying was that my subsequently installed Waves plug-ins also worked first time, still recognising their disk authorisation: this means you can install them on as many partitions as you like, as long as you don't remove the original drive.

Each version of Windows will need its own dedicated partition, so your life will still be a lot easier using a utility like Partition Magic to split up your drive, since even using Microsoft's various Setup Wizards you won't get the option to resize them at any subsequent time. Moreover, unlike the total freedom provided by hiding every partition but the one you're currently installing, using the Microsoft multi-boot system imposes various restrictions. First, you'll need to install the operating systems in the order in which they were released, so that each recognises those already installed.

Just use the CD-ROM setup, and choose 'Install a new copy' so that it doesn't do it over the top of each previous installation.

The wizard takes you through all the steps. It will show all the partition along with the size. I have tried removing the RAM and putting it back, which didn't work, and now my hard disk cannot be detected. Keep in mind that installing a second hard drive in modern laptops or Mac computers is not possible, though you can replace the current hard drive at the risk of voiding your computer's warranty. I believe you are asking about partitioning a single drive into multiple partitions. No; only the primary drive needs an operating system. A reliable manufacturer.

Additional boot disk drive from hard

Additional boot disk drive from hard

Additional boot disk drive from hard

Additional boot disk drive from hard

Additional boot disk drive from hard. Windows 10 All-In-One For Dummies, 3rd Edition

.

Partitioning PC Hard Drives For Multi-boot Systems

Windows has ruled the desktop operating system market ever since Microsoft teamed with IBM to produce the software for the first line of PCs in the s. Nevertheless, alternate operating systems may offer applications or features you want to test or try. Alternatively, you may simply want to install two versions of Windows. If your computer has two hard drives, you can install a second operating system on the second drive and set up the machine so you can choose which OS to boot at startup.

Shut down the computer and restart it. As soon as the machine starts to boot, insert the installation disc for the secondary operating system into the optical drive of the computer.

Ensure that you insert the disc before the Windows logo appears on the screen or you will have to reboot the computer with the disc inserted. Wait for the computer to boot from the installation disc and display the initial setup menu for the second operating system.

Click the "Install" or "Setup" button in the setup screen for the second operating system. When prompted to choose a drive for the installation, select the primary partition for the secondary hard drive. If your primary Windows hard drive has only one partition -- the "C:" drive -- the secondary drive's partition probably uses the "D:" drive letter. If the hard drive with Windows installed has two partitions -- the "C" and "D" drives -- the drive letter for the main partition on the secondary hard drive probably uses the "E:" drive letter unless you changed it manually using the Windows Disk Management utility.

Follow the remaining prompts to create additional partitions on the secondary drive if needed and format the drive with the needed file system. Follow any prompts to allow the installation routine to copy needed files and personalize the operating system. Reboot the computer when prompted. After the computer restarts, a new "Windows Boot Manager" appears on the screen prompting you to select an operating system to boot. Press the down-arrow button to highlight and select the "Windows 7" boot option if it does not appear first on the boot menu.

Press the "Enter" key to boot in to Windows 7 normally. Log in with your Windows username and password if prompted. Click the Start button, then type "msconfig" in the search box and press "Enter.

Click and select the name of the operating system that you want to boot by default when the computer starts. When you install most secondary operating systems, Windows 7 remains the default OS on bootup. However, this may not always be the case.

Nevertheless, select the operating system that you want to boot automatically if you do not select an OS in the Windows Boot Manager screen. Enter a value in seconds in the "Timeout" field.

This is the amount of time the Windows Boot Manager screen appears and waits for you to select a boot option. The default Timeout value is 30 seconds. Click "Apply," then "OK" to save the boot menu changes.

Restart the computer and use the Windows Boot Manager to boot into the operating system you want to use. This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

To submit your questions or ideas, or to simply learn more about It Still Works, contact us. Step 1 Shut down the computer and restart it. Step 2 Click the "Install" or "Setup" button in the setup screen for the second operating system. Step 3 Follow the remaining prompts to create additional partitions on the secondary drive if needed and format the drive with the needed file system. Step 4 Press the down-arrow button to highlight and select the "Windows 7" boot option if it does not appear first on the boot menu.

Step 5 Click the Start button, then type "msconfig" in the search box and press "Enter. Step 6 Click and select the name of the operating system that you want to boot by default when the computer starts. Step 7 Enter a value in seconds in the "Timeout" field. Video of the Day. Brought to you by Techwalla. About the Author This article was written by the It Still Works team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information.

Additional boot disk drive from hard

Additional boot disk drive from hard